Reception Desks NZ: Types, Sizes, Prices and What to Check Before You Buy
The short answer
A reception desk in New Zealand costs from about $913 excluding GST for a basic 1700mm counter with a desk behind it, to about $7,845 excluding GST for a 3000mm wheelchair accessible counter, based on published New Zealand supplier prices checked in November 2026. Most small offices land somewhere in between, and the final figure depends on the width, the materials, whether the counter is a standard unit or custom made, and what is included in the price.
This guide explains the types, the sizes that work in real New Zealand workplaces, the prices you can expect, and the accessibility rules that apply when the desk is used by the public.
What a reception desk actually is
A reception desk is two things at once. It is a work surface where a receptionist sits and works, and it is a counter that visitors approach. Those two parts sit at different heights, and that split is what makes a reception desk different from an ordinary office desk.
The work surface behind the counter is a normal desk height, around 720mm to 760mm from the floor. That is the height a person can sit at and type comfortably for a full working day. The counter panel facing the visitor is higher, usually 1050mm to 1100mm. It gives visitors somewhere to rest their arms while standing, it hides the working area behind it, and it creates a clear point of contact in the room.
Some desks combine both parts in one unit. A counter with a desk attached behind it is the most common arrangement in New Zealand offices, and it is the type most suppliers list first. Other desks are modular, which means the counter and the work desk are separate pieces that can be arranged to suit the room. Modular pieces cost more in total, but they give more freedom with layout.
Reception desks are used in offices, medical and dental practices, hotels and motels, salons, schools, showrooms and anywhere else visitors arrive and need to be greeted. The job is the same in each case, but the traffic, the privacy needs and the amount of equipment behind the counter change a lot from one setting to another.

Types of reception desks
Straight counters
A straight counter is a single run in one line. It is the simplest type, the easiest to place against a wall or as a freestanding island, and usually the cheapest per metre of width. Straight counters suit small offices, professional service firms and medical practices where one person staffs the desk and the visitor flow is steady rather than heavy.
The drawback is space. A straight counter gives the receptionist one work surface, and if the practice grows or a second person needs to work there during busy periods, there is nowhere extra to go. If you expect growth, it is worth pricing the next size up at the start, because replacing a counter later costs more than buying a wider one now.
L-shaped desks
An L-shaped desk adds a return, which is a second work surface running at right angles to the main counter. The return holds a printer, a second monitor, filing or a second workstation, without widening the part of the desk that faces the public.
L-shaped desks suit busier receptions, practices with two staff on at peak times, and any office where the receptionist also handles printing, scanning or filing. The return adds depth to the workspace behind the counter, so the room needs enough floor space behind the desk for a chair to move and for a second person to pass. Measure the space behind the desk, not just the front, before choosing this shape.
Curved and angular desks
Curved desks wrap around the receptionist in a gentle arc, and angular desks use angled sections to create a similar effect. Both types look more designed than a straight run, and they are common in law firms, boutique agencies, hotels and corporate head offices where the lobby is part of the brand.
The trade-off is cost and flexibility. Curved and angled units are usually made to order or sold as fixed modules, so they cost more than a straight counter of the same width, and they are harder to rearrange if the office moves or the layout changes. They also need more floor space than their width suggests, because the curve pushes the desk further into the room.
Standing-height and adjustable desks
Some reception desks are built for staff who stand, and some use height adjustable mechanisms so the work surface can move between sitting and standing positions. Standing-height counters suit fast check-ins, such as a busy clinic or a co-working space, where the receptionist is on their feet and visitors pass through quickly.
Height adjustable desks are less common as reception counters, and they cost more. They make sense where one desk is shared by people of very different heights, or where the receptionist alternates between sitting and standing through the day. For most small offices, a fixed-height desk with a good chair is the practical choice.
Custom-made desks
A custom desk is built to a specific width, shape and finish, usually by a joiner or a commercial furniture maker. Custom desks are the answer when the reception area is an unusual shape, when the desk needs to match existing joinery, or when the business wants a particular stone, timber or branded finish.
Custom work is quoted per job, so there is no published price list to compare. Expect the process to take longer than buying a standard unit, because the maker needs to measure, draw, build and install. If the opening date of the office is fixed, order custom work well ahead of the date, and confirm the lead time in writing before paying a deposit.

Sizes and layout: what fits in a New Zealand office
Getting the size right matters more than getting the look right. A desk that is too small leaves the receptionist crowded and the counter cluttered. A desk that is too large eats floor space that the waiting area needs. The figures below come from a New Zealand supplier guide for reception desk dimensions, and they reflect what fits people who use these desks every day in real workplaces.
| Measurement | Typical range in NZ | Notes |
|---|---|---|
| Work surface height | 720–760mm | Standard desk height, comfortable for seated keyboard work |
| Raised counter panel height | 1050–1100mm | Lets standing visitors rest their arms without stooping |
| Single-person width | 1200–1800mm | Room for a monitor, phone and document space |
| Multi-person width | 2400mm and up | Two receptionists side by side need at least this much |
| Work surface depth | 600–900mm | Deeper suits dual monitors, printers and filing |
| Clearance around the desk | Minimum 900mm | Keeps pathways clear, including for wheelchairs |
Width is decided by how many people work at the desk at once. A single receptionist is comfortable in 1200mm to 1800mm, which leaves room for a monitor, a phone, some document space and a bit of separation between the public end of the counter and the active work area. Two receptionists working side by side need at least 2400mm, and often an L-shaped or U-shaped layout so each person has a defined workspace. Shared counters where two people overlap tend to create friction, with misplaced files and awkward monitor placement.
Depth is decided by equipment. A desk that handles mostly digital check-ins can work with a shallower footprint, around 600mm of work surface depth. A desk with dual monitors, a large format printer or physical filing needs 750mm to 900mm. Measure the equipment that will sit behind the counter before choosing the depth, and include the space the chair needs to move.
Clearance is the space around the desk, and the minimum is 900mm on the front and sides. That figure comes from the accessibility standard NZS 4121:2001, and it keeps pathways clear for visitors with mobility needs. It also gives the space room to breathe, which matters in a small lobby. Measure the whole reception area, not just the wall the desk will sit against, and mark out the footprint on the floor with tape before ordering.
Materials and finishes
Laminate is the most common surface on reception desks in New Zealand commercial fit-outs. It is durable, easy to clean, available in a wide range of finishes, and straightforward to replace if a section is damaged. For a desk that takes daily contact from bags, paperwork and forearms, laminate is a practical choice.
Timber and timber veneer give a warmer look and suit professional service firms, but they cost more and need more care. Scratches and water marks show more readily than on laminate, and repairs are harder. Glass tops look striking and are easy to wipe, but they show fingerprints and need regular cleaning to look their best. Metal frames and accents add strength and a modern look, and they are often used on the base or the legs rather than the whole desk.
Stone and solid surface tops, such as engineered stone, sit at the top of the price range. They are heavy, they need a strong base, and they are usually part of a custom build rather than a standard unit. They make sense in a high-end hotel lobby or a corporate head office where the desk is a deliberate design feature.
Whatever material you choose, check the warranty. A commercial reception desk in daily use should carry a minimum five-year structural warranty, according to New Zealand supplier guidance. Cheaper options that look similar in photos often do not carry the same warranty, and that difference shows up within a year or two of daily use.
Finish colour is a practical decision as well as a visual one. Darker finishes hide scuffs better on the public-facing counter panel, where bags and elbows make contact all day. Lighter surfaces on the work surface behind the counter help with screen glare and general visual clarity during long shifts.

Reception desk prices in NZ
Prices below are from Office Products Depot, a New Zealand owned office supplier, from its published reception desk listings checked on 10 November 2026. All prices exclude GST, and the supplier notes that prices are in New Zealand dollars. Stock was listed as available for order on the date checked, which means the units are ordered in rather than held on the shelf.
| Product | Size | Price (ex GST) |
|---|---|---|
| Zealand Reception Counter with Desk, Nelson, Seasoned Oak | W1700 x D700 x H1125mm | $913.38 |
| Zealand Reception Counter with Desk, Milford, Coastal Elm | W1700 x D700 x H1125mm | $1,237.10 |
| Accent Block Reception Counter | W1800 | $6,612.20 |
| Accent Block Reception Counter | W2000 | $6,880.63 |
| Accent Block Reception Counter | W2400 | $6,975.66 |
| Accent Block Reception Counter, Wheelchair Access | W2400 | $6,880.63 |
| Accent Block Reception Counter, Wheelchair Access | W2700 | $7,782.04 |
| Accent Block Reception Counter, Wheelchair Access | W3000 | $7,845.00 |
The gap between the two ranges is large, and it reflects what is being sold. The Zealand counters are standard units with a counter and a desk in one, in melamine finishes such as Seasoned Oak and Coastal Elm. The Accent Block counters are larger, heavier commercial units in widths from 1800mm to 3000mm, with wheelchair access versions that include a lowered section.
Three things push the price up. The first is width: a 3000mm counter uses more material and costs more to make and to freight than a 1700mm unit. The second is the build: a heavier commercial carcass with a thicker top and a stronger base costs more than a light standard unit. The third is accessibility: the wheelchair access versions include a lowered section with knee space, which adds to the build cost.
Custom desks are quoted per job, so there is no published figure to compare. As a rough guide, a custom desk usually costs more than the equivalent standard unit, because the maker is building one piece rather than a production run, and the price includes measuring, design and installation. Get at least two quotes, and make sure each quote lists the same things, including delivery, installation, and any electrical work for power points or data cabling.
Delivery and installation are often charged separately, and that matters for a large desk. A 2400mm or 3000mm counter may not fit through a standard doorway in one piece, and it may need two people to carry and assemble. Ask the supplier whether delivery includes carrying the desk into the room, assembly, and removal of packaging. If the building has stairs and no lift, say so before ordering, because that can change the delivery charge.

Accessibility rules you cannot ignore
If the reception desk is used by the public, accessibility is not optional. Building Code Clause G5, Interior Environment, says in performance requirement G5.3.4 that where reception counters or desks are provided for public use, at least one counter or desk shall be accessible. That requirement applies to communal residential buildings including hotels and motels, communal non-residential buildings including cinemas and museums, and commercial buildings including shops, offices and banks.
At least one accessible section is required where a reception counter or desk is provided for public use. Under NZS 4121:2001, that space must be at least 900mm wide, with a writing surface 775mm high, at least 675mm of under-bench height (700mm is preferred), and at least 540mm of knee and toe space depth. A counter at 1200mm or 1300mm high becomes a separation barrier for wheelchair users and people of short stature, who cannot be seen by the receptionist over it.
The design guidance sits in NZS 4121:2001, Design for access and mobility. Section 11.1 of that standard says reception counters and desks for public use on an accessible route shall have at least one space for use by people in wheelchairs, as visitors and as staff working in the reception area, and that space shall be at least 900mm wide.
The Ministry of Business, Innovation and Employment publishes guidance on accessible reception and service counters, and it gives the critical dimensions from NZS 4121:2001. A writing surface or desk top should be 775mm high, with a minimum under-bench height of 675mm, and 700mm is preferred. The depth for knee and toe space should be at least 540mm. Knee space should be at least 250mm deep, along with toe space 250mm deep and 300mm high, and the vertical clearance under the counter top should be at least 700mm.
Height is where most counters go wrong. Research cited by MBIE shows that a 900mm high counter is practical for wheelchair users, and it is a usable height for people standing too, so sometimes the whole counter can be 900mm high. A counter at 1200mm or 1300mm is acceptable for an average height person standing, but it becomes a separation barrier for many other people and for wheelchair users. Wheelchair users and people of short stature, including children, cannot be seen by the receptionist over a 1200mm counter, and their reach is restricted.
The guidance also warns against hiding the accessible section. A counter with a lower section tucked out of sight, or around the corner, is a poor solution. A staff member should be able to attend a customer at the lower section without having to stop attending customers at another part of the counter. The best solution, where a series of identical counters is provided, is often for all of them to be equally accessible.
There is a real consequence for getting this wrong. In Determination 2004/13, a bar counter that was 1100mm high for its full length was found not to comply with Clause G5 of the Building Code, because it made no provision for people with disabilities. The acceptable solution G5/AS1 does not give guidance on the design of accessible counters, so NZS 4121 is the means of compliance to follow.
If you are buying a standard unit, the Accent Block wheelchair access counters listed in the price table above are built with a lowered section. If you are having a desk custom made, give the maker the NZS 4121 figures before the design is drawn, and check the finished design against them. A desk that is built first and measured later is an expensive mistake.
What to check before you buy
Measure first, order second. Measure the wall or the floor area the desk will occupy, the width of every doorway and corridor it must pass through, and the lift size if the office is not on the ground floor. A 3000mm counter that cannot get through the front door is not a bargain at any price. Mark the footprint on the floor with tape, and stand in the space as a visitor would, to check that the desk does not block the entry or the path to the lifts and toilets.
Check the access requirements for your building. If the desk is for public use, at least one section must be accessible under Clause G5, with a 900mm wide space and a 775mm writing surface. Confirm this with the supplier or the maker before ordering, and get it in writing if the desk is custom made.
Plan the cables before the desk arrives. A reception desk usually needs power for at least a computer, a monitor, a phone and often a printer, a card terminal or a visitor check-in tablet. The OPD Euro Reception Desk, a New Zealand made range, includes cable ports for this reason. Count the devices, count the power points, and check whether the desk has cable grommets or a cable tray. Running cables across the floor after installation is untidy and a trip hazard.
Think about storage. A receptionist needs somewhere for stationery, forms, keys, mail and personal items. Some counters include drawers or cupboards under the work surface, and some are open underneath. If the desk has no storage, you will need a separate unit, and that takes more floor space. Lockable storage matters if the desk holds keys, cash or confidential documents.
Check the durability for the setting. A desk in a medical practice or a busy hotel lobby takes far more contact than a desk in a small office with a handful of visitors a day. Laminate is the standard choice for high traffic, and a five-year structural warranty is the minimum to expect on a commercial unit. Ask what the warranty covers, and whether it covers the work surface, the structure, or both.
Confirm the lead time and what it includes. Standard units listed as available for order are usually ordered in and then delivered, which can take days or weeks depending on the supplier and the freight route. Custom desks take longer. If the office opening date is fixed, work backwards from that date and allow time for delivery, assembly, cabling and a final clean before opening.
Ask about delivery, assembly and removal of packaging. Large counters may arrive in sections and need assembly on site, and the packaging for a 3000mm unit is substantial. Confirm whether the price includes delivery to the room, assembly, and taking the packaging away. If the supplier only delivers to the kerb, budget for someone to carry and assemble the desk.
Where reception desks fit
Offices are the most common setting, and the choice there is driven by the number of staff and the volume of visitors. A small professional office with one receptionist and a steady flow of clients is well served by a 1700mm or 1800mm straight counter. A larger office with two receptionists at peak times needs 2400mm or more, or an L-shaped layout. If you are setting up that office from scratch, our guide to starting your own business in NZ covers the steps that come before the fit-out.
Medical and dental practices have specific needs. The desk is often the first point of contact for patients who may be unwell or anxious, so the counter should feel welcoming rather than fortress-like, and the accessible section should be obvious and easy to reach. Privacy matters too, because patients may discuss health details at the desk. A counter with a raised panel gives the receptionist some privacy for the screen, while the lower accessible section keeps the desk usable for everyone.
Hotels and motels use reception desks for check-in, and the guidance from MBIE notes that the general height can be 900mm, with a 775mm high section so that all people checking in can write at the counter. Hotels also need the desk to handle luggage, keys and payment terminals, so the work surface behind the counter needs to be generous.
Salons, clinics and showrooms use smaller desks, often in the 1200mm to 1800mm range, because the receptionist also manages bookings and retail displays. The desk needs to look good, because it is part of the shopfront, but it still needs storage for products and a place for a card terminal.
Schools and community buildings use reception desks at the front office, and the accessible section matters there as well, because parents and visitors include wheelchair users and people of short stature. A desk that is too high creates a barrier on the first visit, which is the opposite of what a school office should do.
If you are planning the wider fit-out, the Business and Industry section has more guides on setting up and running a New Zealand workplace.
Frequently asked questions
How much does a reception desk cost in NZ?
A standard counter with a desk starts at about $913 excluding GST for a 1700mm Zealand unit, based on Office Products Depot prices checked in November 2026. Larger commercial counters run from about $6,612 to $7,845 excluding GST for 1800mm to 3000mm widths. Custom desks are quoted per job and usually cost more than the equivalent standard unit. Delivery, installation and GST are usually extra, so confirm what the quoted price includes.
What size reception desk do I need?
For one receptionist, 1200mm to 1800mm wide is the usual range in New Zealand. For two receptionists working side by side, allow at least 2400mm. Depth is usually 600mm to 900mm depending on equipment, and you need at least 900mm of clear space around the front and sides of the desk. Measure the room and mark the footprint on the floor before ordering.
What height should a reception desk be?
The work surface where the receptionist sits is usually 720mm to 760mm high. The raised counter panel facing visitors is usually 1050mm to 1100mm high. If the desk is used by the public, at least one section must be accessible, with a writing surface 775mm high and a space at least 900mm wide, under Building Code Clause G5 and NZS 4121:2001.
Do reception desks need to be wheelchair accessible?
Yes, where they are provided for public use. Building Code Clause G5.3.4 says at least one reception counter or desk shall be accessible. That applies to commercial buildings, including shops, offices and banks, as well as hotels, motels, cinemas and museums. The accessible section should be visible and usable, not tucked around a corner.
What is the best material for a reception desk?
Laminate is the most common choice in New Zealand commercial fit-outs because it is durable, easy to clean and available in many finishes. Timber veneer looks warmer but costs more and shows wear sooner. Glass looks striking but shows fingerprints. Stone and solid surface tops are the most expensive and are usually part of a custom build. For high traffic areas, laminate is the practical choice.
How long does it take to get a reception desk in NZ?
Standard units listed as available for order are ordered in and then delivered, which can take days or weeks depending on the supplier and the freight route. Custom desks take longer, because the maker needs to measure, design, build and install. Confirm the lead time in writing before paying a deposit, and allow extra time for assembly, cabling and cleaning before the office opens.
Should I buy a standard desk or have one custom made?
Buy a standard unit if the reception area is a straightforward shape and the published sizes fit the space, because it is cheaper and faster. Have one custom made if the area is an unusual shape, if the desk needs to match existing joinery, or if you want a specific stone, timber or branded finish. Get at least two quotes for custom work, and make sure each quote lists delivery and installation.
This guide is general information for New Zealand businesses buying a reception desk. Prices are from the suppliers named, checked on 10 November 2026, and they exclude GST unless stated otherwise. Prices change, and the figure you are quoted may differ. Building Code and accessibility requirements are summarised from MBIE guidance and NZS 4121:2001; for a specific building or fit-out, confirm the requirements with your designer, builder or council before ordering. This guide is not legal, building or design advice.
